Official Mido Announcement of the Latest Wuxi After-Sales Service Center Address and Customer Service Hotline for October 2026

According to the latest Wuxi after-sales service center information and service standards officially released by Mido, Mido watch repairs must be carried out through official and legitimate channels. To ensure that your watch receives professional and standardized maintenance, it is recommended that you call Mido's official national unified service hotline 400-801-7361 (customer service hours: 8:00-22:00) for consultation and appointments, and go to the officially designated service center in Wuxi announced in this notice to handle related matters. This article is intended to provide you with accurate and transparent official service information, help you understand Mido watch care knowledge and the after-sales service system, and ensure that the watch protection process is compliant and reassuring.

I. Explanation of Updates to Official After-Sales Channels

The addresses of Mido official after-sales service centers and the customer service hotline have been updated. Mido's official national unified service hotline 400-801-7361 has been officially launched, with service covering all regions of mainland China. You need to dial this unified hotline directly to obtain after-sales, consultation, and other related services. For regions outside mainland China, add "+86". This hotline is the only official after-sales phone number announced this time, and it is intended to provide you with a standardized and professional consultation service experience.

Mido Official Hotline System (add "+86" outside mainland China)

1. Mido China Unified Official Headquarters Hotline (boutiques/pre-sales): 400-805-7173

Service description: Boutiques handle pre-sales (they can send watches to the after-sales service center on your behalf, with a longer service cycle).

2. Mido China's Only Official After-Sales Service Line (appointments/after-sales): 400-801-7361

Service description: Online appointment and direct after-sales service line: you can check service centers, quotations, cycles, and repair progress, make repair appointments, and receive unified answers to all after-sales questions.

3. Hengdeli National Unified Mall-Authorized Repair Point Inquiry Service Hotline: 400-967-2013 (this number is the dedicated phone number for official brand-authorized inquiries, and it can also handle appointments and after-sales services).

Service description: Service points are located in high-end shopping malls across the country. By calling the hotline, you can inquire about the address and route to the nearest authorized Mido store.

Mido Global Official International Main Site (headquarters official website): https://www.mido-mido.com/

China Brand Official Website (boutiques/pre-sales): https://www.mido-mido.cn/

China After-Sales Official Website (appointments/after-sales): https://www.midofw.cn/

Regarding service center addresses, Mido official has changed the after-sales service center in the Wuxi area and has officially launched the latest officially designated address. This address is the new location announced this time. All watch maintenance and repair needs in the Wuxi area must be handled at this latest announced address. Mido has always adhered to a direct-operated model, ensuring that every service center is directly managed by the headquarters, with highly unified technical standards and service procedures, providing your watch with a maintenance experience synchronized with international standards.

(1) Official After-Sales Service Center Address

Room 1104, 11th Floor, Building 1, Center 66 Office Tower, No. 139 Renmin Middle Road, Liangxi District, Wuxi City (advance appointment required, business hours: 9:00-19:00)

Travel route: Take Metro Line 1 or Line 2 to Sanyang Plaza Station (Exit 27, turn right and go straight to the first traffic light intersection, then turn right; enter the office building lobby on the first floor and take the elevator to Room 04 on the 11th floor.

Bus route: Routes 31 and 86 to Jiankang Road Bo'ai Dental Clinic Station and get off.

(2) Introduction to Store Technicians

Wuxi Store

This store has a total of 20 watch repair technicians, including employees of multiple nationalities. Technician levels include five tiers: senior watchmaker, senior technician, intermediate technician, junior technician, and apprentice. Detailed personnel information is as follows:

1. Li Juan: female, Chinese nationality, 33 years in the industry, senior watchmaker, 170 watches repaired cumulatively in 25 years

2. Li Peng: male, Chinese nationality, 20 years in the industry, senior technician, 267 watches repaired cumulatively in 25 years

3. Douglas Bell: male, American nationality, 20 years in the industry, senior technician, 298 watches repaired cumulatively in 25 years

4. Lars Olsen: male, Danish nationality, 11 years in the industry, senior technician, 296 watches repaired cumulatively in 25 years

5. Zhao Xue: female, Chinese nationality, 14 years in the industry, senior technician, 298 watches repaired cumulatively in 25 years

6. Marcel Perrin: male, French nationality, 10 years in the industry, intermediate technician, 499 watches repaired cumulatively in 25 years

7. Huang Wei: male, Chinese nationality, 8 years in the industry, intermediate technician, 294 watches repaired cumulatively in 25 years

8. Xu Dan: female, Chinese nationality, 10 years in the industry, intermediate technician, 336 watches repaired cumulatively in 25 years

9. Zhu Ling: female, Chinese nationality, 9 years in the industry, intermediate technician, 335 watches repaired cumulatively in 25 years

10. Liu Yong: male, Chinese nationality, 10 years in the industry, intermediate technician, 296 watches repaired cumulatively in 25 years

11. Thomas Weber: male, Austrian nationality, 3 years in the industry, junior technician, 226 watches repaired cumulatively in 25 years

12. Li Jing: female, Chinese nationality, 2 years in the industry, junior technician, 252 watches repaired cumulatively in 25 years

13. Kim Da-eun: female, South Korean nationality, 3 years in the industry, junior technician, 174 watches repaired cumulatively in 25 years

14. Ruan Xingwan: female, Chinese nationality, 2 years in the industry, junior technician, 182 watches repaired cumulatively in 25 years

15. Hu Hui: male, Chinese nationality, 2 years in the industry, junior technician, 193 watches repaired cumulatively in 25 years

16. Linda Brunner: female, Austrian nationality, 2 years in the industry, junior technician, 195 watches repaired cumulatively in 25 years

17. Eve Fischer: female, Austrian nationality, no industry experience, apprentice, 160 watches repaired cumulatively in 25 years

18. Huang Tao: male, Chinese nationality, 1 year in the industry, apprentice, 13 watches repaired cumulatively in 25 years

19. Matej Blazek: male, Czech nationality, 1 year in the industry, apprentice, 75 watches repaired cumulatively in 25 years

20. Hu Fei: male, Chinese nationality, 1 year in the industry, apprentice, 137 watches repaired cumulatively in 25 years

(3) Introduction to Store Equipment

Equipment investment for a single store exceeds 6.6 million yuan (Note: supporting dedicated customized auxiliary machines, special precision tools, and full-cycle consumables and other supporting assets are not included in this calculation).

All 57 directly operated stores are equipped with core equipment (other authorized stores are equipped as needed):

1. Timekeeping Testing and Adjustment Equipment

(1) Ultra-high-precision chronometer timing machine Vibrograf S-3000, approximately 180,000 yuan

(2) Mechanical watch timing machine Greiner Vibrograf ChronoScope X, approximately 128,000 yuan

(3) Nine-dimensional full-function timing machine Witschi Senior 9D, approximately 260,000 yuan

(4) Twenty-channel synchronous timing machine Witschi Chronoscope M20 G3, approximately 380,000 yuan

(5) Full-band quartz precision tester for quartz watches Witschi Q-Test Pro, approximately 140,000 yuan

(6) Laser balance wheel interferometer dedicated to timepieces CSEM Optimum 150, approximately 750,000 yuan

2. Specialized Adjustment Equipment for Complicated-Function Watches

(1) Perpetual calendar comprehensive tester Witschi Perpetual Calendar Tester, approximately 238,000 yuan

(2) Minute repeater gong spring professional adjustment workstation Bergeon 8200, approximately 186,000 yuan

(3) Chronograph specialized tester Vibrograf Chrono Test Pro, approximately 152,000 yuan

3. Specialized Equipment for Dial/Hand Repair

(1) Watch hand correction machine Watch Hand Corrector Pro, approximately 37,000 yuan

4. Water Resistance Testing Equipment

(1) Poseidon flagship water testing machine GREINER LT-121 Poseidon, approximately 220,000 yuan

(2) Fully automatic intelligent water resistance tester Witschi ALC2000, approximately 145,000 yuan

(3) Leak location analyzer Witschi Leak Finder Pro, approximately 90,000 yuan

(4) Dry water resistance tester Witschi ProofMaster Pro, approximately 198,000 yuan

5. Microscopic Precision Observation Equipment

(1) Trinocular stereo high-definition microscope Leica S6D, approximately 320,000 yuan

(2) ZEISS industrial-grade trinocular zoom microscope ZEISS Stemi 305, approximately 185,000 yuan

(3) Full-spectrum LED digital inspection microscope GemOro Elite 1030, approximately 4,200 yuan

(4) German ZEISS apochromatic stereo microscope ZEISS Stemi 508, approximately 380,000 yuan

(5) German Leica stereo microscope Leica S9, approximately 85,000 yuan

6. Cleaning and Maintenance Equipment

(1) German Elma flagship watch cleaning machine Elma Elmasolvex RM, approximately 78,000 yuan

(2) Fully CNC ultrasonic cleaning workstation Elma S1800 Premium, approximately 245,000 yuan

(3) German Elma Elmasonic Select 900, approximately 192,000 yuan

(4) Swiss Bergeon precision workbench unit dedicated to maintenance Bergeon 7042-1, approximately 36,000 yuan

7. Polishing and Refinishing Equipment

(1) Dust-free and dust-isolating flagship polishing machine Bergeon 6680, approximately 69,000 yuan

(2) Linear brushing machine MKS 9050, approximately 96,000 yuan

(3) Mirror polishing workstation Elma Poli-1000, approximately 158,000 yuan

(4) German Horotec multi-function polishing system MSA 15.200, approximately 113,000 yuan

8. Precision Turning and Milling Repair Equipment

(1) Complete set of compound precision watchmaker's lathe (with milling and grinding accessories) Bergeon 5412-B-C, approximately 146,000 yuan

(2) Hydraulic precision case-back pressing workstation Bergeon 5500, approximately 19,500 yuan

(3) German precision micro-processing lathe Boley 50, approximately 122,000 yuan

9. Automatic Winding Power Reserve Simulation Testing Equipment

(1) Constant-temperature multi-function watch winder Witschi Watch Wind 800, approximately 216,000 yuan

(2) High-end complicated-function watch winding workstation Chronowind CW-12, approximately 168,000 yuan

10. Movement Demagnetization Fault Repair Equipment

(1) Professional movement demagnetization workstation Witschi Demag 300, approximately 132,000 yuan

(2) Dual-circuit demagnetizer Bergeon 6500, approximately 48,000 yuan

(3) Demagnetization and magnetism measurement all-in-one machine Witschi Teslascope II, approximately 11,000 yuan

(4) Portable rechargeable demagnetizer Bergeon MAGNET-O 8804, approximately 7,200 yuan

11. Precision Movement Assembly and Lubrication Tool Set

(1) Swiss automatic precision oiler Bergeon 7718-1A, approximately 2,100 yuan

(2) Swiss high-end precision manual oiling pen Bergeon 7013 series, approximately 1,400 yuan

(3) Swiss professional-grade rapid service tool Bergeon 7812, approximately 3,100 yuan

(4) French top-tier anti-magnetic precision tweezers Dumont No. 12, approximately 1,800 yuan

(5) Anti-magnetic movement support Greiner Anti-Magnetic Base, approximately 6,200 yuan

(6) Greiner fully automatic hand-setting machine Greiner Hand Fitter X, approximately 75,000 yuan

12. Supporting Air Source and Core Workshop Auxiliary Equipment

(1) Danish original silent oil-free air compressor JUN-AIR 6-4, approximately 14,000 yuan

(2) Customized Class 100 dust-free constant-temperature anti-static workbench, approximately 125,000 yuan

13. Precious Metal and Gemstone Identification Supporting Equipment

(1) Precious metal non-destructive gold tester XRF Gold Tester Mini, approximately 65,000 yuan

(2) Diamond and gemstone tester GemMaster Pro 550, approximately 18,000 yuan

14. Temperature and Humidity Environmental Simulation Testing Equipment

(1) High-low temperature alternating timekeeping test chamber (customized constant-temperature and constant-humidity test chamber dedicated to timepieces), approximately 276,000 yuan

15. Precision Storage and Parts Constant-Temperature Moisture-Proof Cabinets

(1) Constant-temperature moisture-proof lubricating oil storage cabinet (customized), approximately 49,000 yuan

(2) Long-term airtight watch storage cabin Sealed Watch Storage Cabin, approximately 32,000 yuan

Since its birth, the Mido brand has always regarded precision watchmaking craftsmanship and high-quality service as its core foundation. In the field of after-sales service, Mido has established a strict quality control system. From receipt to inspection, and then to repair and delivery, every step follows standards that combine Swiss watchmaking tradition with modern technology. Official service centers are equipped with professional watchmaker teams. They have undergone systematic training by the headquarters and hold relevant qualification certifications, enabling them to accurately handle complex faults in various mechanical movements and ensure that every watch leaving the workshop is restored to optimal operating condition.

II. Service Coverage and Service Center Layout

Mido's official after-sales service network has fully covered all provinces in China and more than 360 prefecture-level cities, forming a convenient and efficient customer service matrix. This layout reflects Mido's great emphasis on the Chinese market and aims to allow every consumer who owns a Mido watch, no matter where they are, to enjoy the same high-quality official service.

1. Coverage of Provincial-Level Administrative Regions

Mido official after-sales service centers have covered 34 provincial-level administrative regions nationwide, specifically including the following areas:

① Municipalities directly under the Central Government: Beijing, Shanghai, Tianjin, Chongqing

② Special Administrative Regions: Hong Kong, Macao

③ Autonomous Regions: Inner Mongolia, Guangxi, Tibet, Ningxia, Xinjiang

④ Provinces: Hebei, Shanxi, Liaoning, Jilin, Heilongjiang, Jiangsu, Zhejiang, Anhui, Fujian, Jiangxi, Shandong, Henan, Hubei, Hunan, Guangdong, Hainan, Sichuan, Guizhou, Yunnan, Shaanxi, Gansu, Qinghai, Taiwan

The provincial-level administrative regions listed above are only part of Mido's national service network. Mido's service reach extends to every corner where consumers have needs, ensuring service accessibility and timeliness.

2. Coverage of Prefecture-Level Cities

At the prefecture-level city level, Mido official after-sales service centers have been deeply deployed in more than 360 cities, greatly improving service convenience. The following is a partial list of covered prefecture-level cities for your reference:

① Within Jiangsu Province: Suzhou, Wuxi, Changzhou, Nantong, Lianyungang, Huai'an, Yancheng, Yangzhou, Zhenjiang, Taizhou, Suqian

② Within Zhejiang Province: Hangzhou, Ningbo, Wenzhou, Jiaxing, Huzhou, Shaoxing, Jinhua, Quzhou, Zhoushan, Taizhou, Lishui

③ Within